Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reactivate the screen of the Fiat 500?

Model: Fiat 500 312 - Years 2007-2024
Part: Car stereo

The touchscreen display of the Fiat 500 can be enabled and disabled at will, based on the convenience of keeping it active or not, for example during a certain moment while driving it is preferred to not have it active and bright. The instructions in the video shown here demonstrate how to do this: obviously with the instrument panel on, press Vehicle on the aforementioned screen, then Controls and finally Screen Off to disable it and Screen On to enable it. That's it, just a few steps, a simple, quick but above all intuitive procedure that is accessible to anyone.

Posted on 1 June 2025 by ScegliAuto

Video tutorial

Related tutorials

Set the time on the Fiat 500.
Set the time on the Fiat 500.
Fiat 500 (2020-2026 / 500 E, 332) Let's see how to proceed in case we need to change the clock settings of the Fiat 500. Sit in the driver's seat, turn the key to turn on the instrume…
How to Reset the Service Light on the Fiat 500 Hybrid
How to Reset the Service Light on the Fiat 500 Hybrid
Fiat 500 (2007-2024 / 312) Resetting the service light on the Fiat 500 Hybrid requires a diagnostic tool. The EOBD socket is located under the dashboard, to the left of the ste…
How to Disable the Traction Control on the Fiat 500
How to Disable the Traction Control on the Fiat 500
Fiat 500 (2007-2021 / ) The electronic traction control system in the new Fiat 500 is factory activated. It is a fully automatic system that can cut engine power to prevent …

    Frequently Asked Questions

    • 500 2007-2022 - Why does the radio volume control on the Fiat 500 not work? Read answer
    • 500 2007-2022 - What to do if the radio of the Fiat 500 does not work? Read answer
    • 500 2012-2023 - How to unlock Fiat 500 car stereo? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos