Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Fiat
  4. :
  5. Croma
  6. : How to remove the rear light on a Fiat Croma

Fiat Croma - Video tutorial

Model: Fiat Croma MK 1 - Years 2005-2010
Part: Tail light
Operation: How to remove the rear light on a Fiat Croma

How to remove the rear light on a Fiat Croma? Let's see in this video how to disassemble the piece: we open the boot of the luggage compartment, with a screwdriver we unscrew (with a socket wrench or screwdriver with insert) the locking pins placed at the side of the rear light; as soon as the headlight is free from any screw, we can detach it from the bodywork (disconnect the relative power supply terminals). We replace bulbs if damaged with pieces of the same size and voltage. Finally we go to reassemble the new rear light and proceed backwards in the assembly of all the annexed parts.


Posted on 27 October 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos