Do it yourself
Frequently asked questions about cars and motorcycles

How do you reset the Service light on the Fiat Doblò?

Model: Fiat Doblo 263, Doblo 2, MK 2 - Years 2009-2021
Part: Service warning light

It will be possible to completely remove the Service light that is shown on the instrument panel of the Fiat Doblò by connecting a diagnostic tool to the OBD port of the vehicle: the latter will be located on the dashboard immediately below the steering column. Once the scanner has been connected, it will be possible to choose the model of the vehicle in question and the corresponding version: it will therefore be possible to follow all the instructions to remove the Service light from the instrument panel, resetting the maintenance interval. Once the reset has been done, the scanner will need to be disconnected.

Posted on 9 July 2025 by ScegliAuto

Video tutorial

Related tutorials

Fiat Doblo (2009-2021 / 263, Doblo 2, MK 2) In order to reset the Service light on the Fiat Doblò, you need to connect a diagnostic tool to the OBD port of the vehicle: this port is located on …
Fiat Doblo (2009-2021 / 263, Doblo 2, MK 2) To reset the Service light that appears on the instrument panel of the Fiat Doblò, you will need to insert the ignition key into the ignition switch:…
Fiat Doblo (2022-2026 / Doblo -3) To correctly and safely complete the manual reset procedure of the service light on your Fiat Doblo third series (year 2023) you only need a few seco…

    Frequently Asked Questions

    • Doblo 2009-2021 - What does the flashing oil warning light mean in Fiat Doblò? Read answer

How to replace the horn on a Renault Duster - Dacia Duster

Today's main instructions will show you the procedure for removing and replacing the horn or sound signal on the Renault Duster, as well as the Dacia Duster. First, open the bonnet of the vehicle and start removing the front bumper by unscrewing all the fixing screws; you will find the horn right in front of the radiator, as shown in the video. At this point, disconnect the electrical connector and unscrew the bracket screw to remove and replace the horn with the new one; finally, reassemble the front bumper!

Watch the video!


by ScegliAuto

More videos