Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the External Rear-View Mirror on a Fiat Punto Evo

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Side mirror

See other generations:
Video tutorial

Today, we will go through the steps to remove and replace the external rear-view mirror on a Fiat Punto Evo. First, open the front door of the vehicle and start by removing the plastic cover located under the mirror; then unscrew the fastening screws and disconnect the electrical connector for the adjustment to remove the entire rear-view mirror, as shown in the video.

At this point, carry out the repair or replacement of the mirror by installing the new one; assemble and refit the rear-view mirror, adjusting the angle of the glass.


Posted on 1 June 2026 by ScegliAuto


Related tutorials

Replace the external rear-view mirror of the Fiat Grande Punto - Punto Evo
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video tutorial, you will see how to remove and replace the external rear-view mirror of the Fiat Grande Punto, as well as the Punto Evo, by f…
How to Remove and Replace the External Wing Mirror on a Fiat Punto Evo
How to Remove and Replace the External Wing Mirror on a Fiat Punto Evo
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) This guide shows the procedure for removing and replacing the external wing mirror on a Fiat Punto Evo. First, move to the outside of the vehicle and…
How to Replace the External Wing Mirror on a Fiat Punto EVO?
How to Replace the External Wing Mirror on a Fiat Punto EVO?
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this tutorial, see how to replace the external wing mirror on a Fiat Punto EVO, a very simple and quick operation. First, position yourself in fro…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos