Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Wiper Blade on a Fiat Punto

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Windshield wipers

See other generations:
Video tutorial

Today you will learn how to replace the wiper blade on your Fiat Punto. With a few coins and a bit of time, you will have a practically new wiper.

First, you need to remove the old blade. To do this, get a screwdriver and, from one of the two ends, secure it to release the old blade.

Then, take the old blade and cut it with pliers to the exact size you need. Now, fit it properly along the wiper rail, taking care not to damage it. Once this step is done, the job is complete.


Updated on 12 March 2026 by ScegliAuto


Related tutorials

How to Change the Rear Windscreen Wiper Blade on a Fiat Punto Evo
How to Change the Rear Windscreen Wiper Blade on a Fiat Punto Evo
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Learn how to change the rear wiper blade on a Fiat Punto Evo. Grasp the rear wiper blade with your hands, gently pull the wiper blade (without breaki…
How to Replace the Rear Wiper Blade on the Fiat Grande Punto
How to Replace the Rear Wiper Blade on the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To replace the rear wiper blade on this vehicle yourself, follow the instructions below and refer to the tutorial video. First, lift the wiper arm un…
How to Replace the Front Windscreen Wiper Blades on a Fiat Grande Punto
How to Replace the Front Windscreen Wiper Blades on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Remove the front wiper blade by hand, gently pulling the movable blade without breaking it, and slide it off the arm on the left. Fit the new blade o…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos