Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Wiper Blade on the Fiat Grande Punto

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Windshield wipers

To replace the rear wiper blade on this vehicle yourself, follow the instructions below and refer to the tutorial video. First, lift the wiper arm until it stops, then press the release tab of the blade and remove it from the arm. Take the new blade and attach it to the arm, then close the tab. Finally, gently press the wiper arm down onto the glass.

Updated on 25 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Open a Stuck Boot on a Fiat Punto?
How to Open a Stuck Boot on a Fiat Punto?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) If the boot of your Fiat Grande Punto is stuck, it’s easy to panic, but you should know that it is possible to open a stuck boot from the outside. To…
How to Replace the Front Wipers on a Fiat Punto
How to Replace the Front Wipers on a Fiat Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this short guide, you will see the steps to remove and replace the front wipers on a Fiat Punto Evo and Grande Punto. First, move to the front of …
How to Remove the Rear Light of the Fiat Punto Evo - Grande Punto
How to Remove the Rear Light of the Fiat Punto Evo - Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this video tutorial, you will learn how to disassemble and replace the rear light of the Fiat Punto Evo, as well as the Grande Punto. First, open …

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos