Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Wiper on Fiat Grande Punto

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Windshield wipers

Start with the rear wiper: lift the arm to its limit, bend the blade away from the arm, and press the clip that holds it in place. Remove the blade from the arm. To fit the new blade, insert it into the arm, bend it so it aligns with the arm, and close the clip. This process is clearly shown in the video. If you're interested, the video also shows how to replace the front wiper blades, which is very similar. This task is manageable for everyone.

Updated on 20 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Wiper Blade on the Fiat Grande Punto
How to Replace the Rear Wiper Blade on the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To replace the rear wiper blade on this vehicle yourself, follow the instructions below and refer to the tutorial video. First, lift the wiper arm un…
How to Replace the Front Wipers on a Fiat Punto
How to Replace the Front Wipers on a Fiat Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this short guide, you will see the steps to remove and replace the front wipers on a Fiat Punto Evo and Grande Punto. First, move to the front of …
How to Remove the Rear Wiper Motor on Fiat Punto
Fiat Punto (1993-1999 / MK 1, 176) In this video tutorial, you will learn how to remove the rear wiper motor on a first-generation Fiat Punto by following the instructions below. First…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos