Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Wipers on a Fiat Grande Punto

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Windshield wipers

To replace the wipers on a Fiat Grande Punto, lift the wiper arm off the windscreen until it is vertical. Rotate the blade to access the fixing point and locate the release tab of the attachment system. Press the catch and slide the blade along the arm until it is completely free. Take the new blade and insert it following the same orientation, pushing it until it clicks to confirm it is locked. Check that it is securely attached by pulling it slightly. Carefully return the arm to the windscreen to avoid damaging the glass. Repeat the operation on the other wiper and, once the installation is complete, operate the system to check its correct functioning.

Posted on 8 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace Wiper Blades on a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In today's video, we will see a very simple and quick maintenance operation. Specifically, we will replace the front and rear wiper blades on the Fia…
How to Replace the Wiper Blades on the Fiat Grande Punto
How to Replace the Wiper Blades on the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In today's video, you will see how to perform a DIY replacement of the wiper blades on the Fiat Grande Punto. This video also applies to the later mo…
Removing the Wiper Motor from a Fiat Grande Punto
Removing the Wiper Motor from a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this tutorial, you will learn how to remove the wiper motor from a Fiat Grande Punto. First, remove the wipers by unscrewing the nuts to take them…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos