Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Disconnect the Fan Resistor on a Fiat Punto

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Blower motor

See other generations:
Video tutorial

How to disconnect the fan resistor on a Fiat Grande Punto? Use a lever to remove the plastic cover under the dashboard where the central tunnel is (right side of the tunnel), and use a screwdriver to undo the cover (where the resistor is located). Disconnect the large connector for the resistor power supply, then extract it from the cabin.

Insert a new fan resistor into the designated space (connect the power supply connector). Finally, reassemble the cover and tighten the screws.

Test the correct operation of the system.


Updated on 14 March 2026 by ScegliAuto


Related tutorials

Replacing the Heater Fan Resistor on Fiat Grande Punto
Replacing the Heater Fan Resistor on Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Want to remove the heater fan resistor on a Fiat Grande Punto? Let's see how to disassemble the fan resistor. Remove the plastic cover from under the…
How to Replace the Cabin Fan Resistor of a Fiat Grande Punto
How to Replace the Cabin Fan Resistor of a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Below we will see the procedure to remove and replace the cabin fan resistor of a Fiat Grande Punto. First, get inside the vehicle on the front passe…
How to Replace the Fan Resistor on a Fiat Grande Punto
How to Replace the Fan Resistor on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) How to replace the fan resistor on a Fiat Grande Punto? Here’s how to carry out the replacement. Use a lever to remove the plastic under the front wi…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos