|
Do it yourself
| |||
| ||||
How to Replace Brake Pads and Discs on a Fiat Punto
Model: Fiat Punto
199, MK 3, Grandepunto , Punto EVO
- Years:
2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Video tutorial
Today, I will show you how to replace the brake pads and discs on your Fiat Punto. With a bit of effort, you can do it yourself. First, unscrew the front bolts to release the brake caliper and then remove the clip holding the caliper. Next, unscrew the bolts that keep the brake caliper tightly closed to free the pads so you can pull them out. Now, push the pistons all the way in using a screwdriver. Once done, you can insert the new pads (ensure they are correctly positioned and properly seated). Before refitting the caliper onto the disc, change the disc. To do this, simply unscrew the central bolt and pull it out. Sand down the area where the new disc will sit, then insert the new disc and secure it by tightening the central bolt. Repeat the same operation on the other wheel.
Updated on 15 March 2026 by ScegliAuto
Related tutorials
Fiat Punto
(2005-2018 /
199, MK 3, Grandepunto , Punto EVO)
This guide outlines the steps to remove and replace the front brake discs on the Fiat Punto Evo, as well as the Grande Punto. First, lift the vehicle…
Fiat Punto
(2005-2018 /
199, MK 3, Grandepunto , Punto EVO)
Below are the instructions for removing and replacing the rear brake pads and disc of the Fiat Punto Evo, as well as the Grande Punto. First, lift th…
Fiat Punto
(2005-2018 /
199, MK 3, Grandepunto , Punto EVO)
This guide covers the removal of the front brakes on a Fiat Grande Punto. Remove the wheel to access the brake disc, unscrew the caliper locking bolt…
Other guides you may be interested in
|
How to Open the Hood of the BMW X3
Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.119
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |