Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Brake Replacement for Fiat Grande Punto

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Brake rotors

This guide covers the removal of the front brakes on a Fiat Grande Punto. Remove the wheel to access the brake disc, unscrew the caliper locking bolt, and take the caliper off the wheel hub. Use a screwdriver to remove the brake pads from the caliper, then unscrew the securing screws around the brake disc. Once the parts are removed, fit the new brake pads onto the caliper and the brake disc onto the wheel hub: secure the caliper with the bracket onto the brake disc. Replace the brake pads on both pairs of brake discs if possible. After fitting the pads and disc, top up the brake fluid and bleed the brake caliper if necessary.

Updated on 3 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Brake Pump in the Fiat Grande Punto?
How to Replace the Brake Pump in the Fiat Grande Punto?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To replace the brake pump in the Fiat Grande Punto, open the bonnet to access the engine bay. The pump is located immediately under the windscreen an…
How to Check and Top Up Fluids on the Fiat Grande Punto 1.2
How to Check and Top Up Fluids on the Fiat Grande Punto 1.2
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Today, in this video tutorial, learn how to check and top up the fluids (engine oil, coolant, brake fluid, and windscreen washer fluid) of the Fiat G…
Replacing the Front Driveshaft Oil Seal on Fiat Grande Punto
Replacing the Front Driveshaft Oil Seal on Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this video, we will see all the steps to remove and replace the front driveshaft oil seal on a Fiat Grande Punto. First, lift the vehicle and remo…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos