Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Timing Belt on a Fiat Punto

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Timing belt

Replace the timing belts at the manufacturer-recommended intervals; here’s how to remove them on a Fiat Punto. Lift the car on a column lift; remove the front wheel and the right wheel arch liner if you have difficulty accessing the belts. Remove the cover panel of the belt (remove the sensor). Using a suitable fixed spanner, loosen the second tensioner and slide the belt off its housing. After installing the new belt, use the fixed spanner to install the tensioner, tightening until the belt has the correct tension (install both belts). Close the belts with the covers.

Updated on 16 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to Replacing the Timing Belt on the Fiat Grande Punto 1.4
Guide to Replacing the Timing Belt on the Fiat Grande Punto 1.4
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) The main instructions provided in this guide will show us how to disassemble and replace the timing belt of the Fiat Grande Punto 1.4. First, let's o…
How to Replace the Timing Belt on a Fiat Punto
How to Replace the Timing Belt on a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) Follow these main instructions to remove and replace the timing belt on a Fiat Punto. First, open the bonnet and start by removing the upper engine c…
Replacing the Timing Belt on a Fiat Grande Punto - Punto Evo 1.2 Petrol
Replacing the Timing Belt on a Fiat Grande Punto - Punto Evo 1.2 Petrol
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this video, you will see the steps to change the timing belt on a Fiat Grande Punto or Punto Evo with a 1.2 petrol engine. First, lift the vehicle…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos