Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Wiper Blade on Fiat 500

Model: Fiat 500 312 - Years 2007-2024
Part: Windshield wipers

Replace the damaged wiper blades on a Fiat 500. Take the blade to be replaced, detach it as shown in the video (gently to avoid breaking it) and slide it off the arm on the left. Install the new blade onto the arm until you hear a click indicating it is secured. Finally, lower the wiper arm onto the windscreen and perform the same operation on the second damaged blade. Test the new blades installed. It is always preferable to use original parts for better durability and quality. Operate the wipers using the control levers.

Updated on 16 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Wiper Blade on a Fiat 500
How to Replace the Wiper Blade on a Fiat 500
Fiat 500 (2007-2021 / ) In this mini guide, discover how to replace the wiper blade on your Fiat 500. Before you begin, ensure the engine is off and the handbrake is engaged…
How to Avoid Damaging the Bonnet Trim When Replacing the Wiper on a Fiat 500 L
How to Avoid Damaging the Bonnet Trim When Replacing the Wiper on a Fiat 500 L
Fiat 500 (2012-2023 / 500 L) In this video tutorial, observe the procedure to avoid damaging the bonnet trim when replacing the wiper on a Fiat 500 L. First, get into the vehicle…
How to Replace the Wiper Blades on the Fiat 500 L
How to Replace the Wiper Blades on the Fiat 500 L
Fiat 500 (2012-2023 / 500 L) In today's video tutorial, you will find instructions on how to remove and replace the wiper blades on the Fiat 500 L in simple and quick steps. Firs…

    Frequently Asked Questions

    • 500 1957-1975 - Where can you find the window washer bag of the vintage Fiat 500? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos