Do it yourself
Frequently asked questions about cars and motorcycles

Replacement of Tailgate Gas Struts on Fiat Multipla

Model: Fiat Multipla MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Hydraulic pistons

Video tutorial

Are the tailgate gas struts not functioning as they should? Here’s how to replace them. Lift the tailgate and secure it. Using a screwdriver, remove the retaining clips at both ends of the strut (remove the retaining clips).

Disconnect the worn strut and fit the new piece into the two mounts. Secure the strut with the metal retaining clips.

Repeat the same process for the removal/installation of the opposite strut. Test the operation of the new struts by simply lifting the rear tailgate.


Updated on 17 March 2026 by ScegliAuto


Related tutorials

Fiat Multipla (1998-2010 / MK 1) If you own a Fiat Multipla and want to locate the OBD port, carefully follow this guide and apply the described steps. First, enter your Fiat Multipl…
Fiat Multipla (1998-2010 / MK 1) Before starting, open the bonnet of your Fiat Multipla by pulling the designated release handle located at the bottom left of the steering column. Be…
Fiat Multipla (1998-2010 / MK 1) Today's main instructions will show us how to replace the timing belt of the Fiat Multipla 1.6 16V. First, we lift the vehicle and start by disassemb…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Where is the battery located on the Aprilia Scarabeo 250ie scooter?

This video shows where the battery is located on the Aprilia Scarabeo 250ie scooter and how to proceed if you need to replace it. As shown, it is located beneath the seat. To access and replace it, first open the seat, then remove the plastic cover by unscrewing the relevant screws with a cross-head screwdriver. Next, disconnect both terminals, starting with the negative, remove the battery from its housing, and install the new replacement following the reverse procedure.

Watch the video!


by ScegliAuto

More videos