Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Electric Steering on Fiat Seicento

Model: Fiat Seicento MK 1 - Years 1998-2010
Part: Steering wheel

How to replace the electric steering on a Fiat 660? Start by removing the inspection panel at the bottom left of the dashboard (take off the plastics under the steering wheel). Remove the upper part of the steering wheel and take it off. Unscrew the steering tightening bolt; remove it from the column. Reach in and locate the base of the steering column (as shown in the video), then unscrew the tightening screws. Remove the indicator stalk with all levers (disconnect the power connector). Extract the steering column after removing all screws. Install the new electric steering column with all the tightening screws and components.

Updated on 19 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Steering Wheel Airbag from the Fiat Seicento?
How to Remove the Steering Wheel Airbag from the Fiat Seicento?
Fiat Seicento (1998-2010 / MK 1) To remove the steering wheel airbag from the Fiat Seicento, detach the covers located at the back of the steering wheel, on the right and left sides.…
How to Remove the Door Panel from a Fiat Seicento
How to Remove the Door Panel from a Fiat Seicento
Fiat Seicento (1998-2010 / MK 1) Before you can start, open the door of your Fiat Seicento. Begin by unscrewing and removing the screws that secure the door panel to the door itself.…
Replacing the Air Conditioning Compressor on Fiat 600
Replacing the Air Conditioning Compressor on Fiat 600
Fiat Seicento (1998-2010 / MK 1) How to replace the compressor on your Fiat 600? The Seicento is not originally equipped for air conditioning, so to fit just the compressor, you need…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos