Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting Tyres on Fiat Panda 2015

Model: Fiat Panda 319, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Tire pressure warning light

See other generations:
Video tutorial

Reset the tyres on a Fiat Panda? Let's see how to reset the tyre warning light. Turn on the ignition and press the "Set" button above the central console.

Scroll using the up and down buttons until you reach the "Reset Tyres" option. Once found, press the Set button.

Scroll through the menu until you find the "Yes" option and press the Set button again. The tyre reset is complete.

Turn off the ignition and check the result of the reset on the instrument cluster. For any type of reset, use the Set button and the up and down scrolling buttons.

Perform the settings with the vehicle turned off and stationary.


Updated on 21 March 2026 by ScegliAuto


Related tutorials

How to Reset the "Tyre Pressure" Light on a Fiat Panda
How to Reset the "Tyre Pressure" Light on a Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) Before starting, sit in the driver's seat of your Fiat Panda. Begin by turning on the ignition, simply by turning the key in the ignition switch, and…
How to Reset the Tyre Pressure Warning Light on the Fiat Panda 3
How to Reset the Tyre Pressure Warning Light on the Fiat Panda 3
Fiat Panda (2012-2021 / ) In today's video, you will learn how to reset the tyre pressure monitoring system (TPMS) warning light on the Fiat Panda third series by following th…
Resetting the Tyre Pressure Light on Fiat Panda
Resetting the Tyre Pressure Light on Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) This very simple procedure can be performed on Fiat Panda and similar vehicles to reset the tyre pressure warning light. Use the selection buttons lo…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos