Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Panda
    4. : Tire warning light reset on Fiat Panda

Fiat Panda - Video tutorial

Model: Fiat Panda 319, MK 3 - Years 2012-2023
Part: Tires
Operation: Tire warning light reset on Fiat Panda

This very simple procedure can be carried out on Fiat Panda pe cars with similar system, to reset the tire pressure warning light. Use the selection buttons located above the climate control controls: after entering the menu, scroll with the arrow to the item "tire reset", enter this submenu and when asked "reset" obviously press "yes". Remember, before resetting the alarm, to check that there are actually no leaks or drops in pressure in the tires: use a pressure gauge to check this, otherwise reset as well.


Posted on 24 February 2024 by ScegliAuto

    Frequently Asked Questions

    • Panda 2003-2012 - How many km do you need to replace the tires on the Fiat Panda? Read Answer
    • Panda 2012-2023 - When does the tire pressure warning light come on in FIAT Panda? Read Answer
    • Panda 2012-2023 - How to turn off the tire warning light in Fiat Panda? Read Answer
    • Panda 2012-2023 - How does the tire pressure warning light work on my Fiat Panda? Read Answer
    • Panda 2012-2023 - What does the Fiat Panda tire pressure warning light mean? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos