Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Tyre Pressure Light on a Fiat Panda

Model: Fiat Panda 319, MK 3 - Years 2012-2026
Part:

What to do if a light appears? Let’s see how to reset the tyre pressure light on a Fiat Panda. To reset the tyre pressure light: turn on the ignition with the key, press the "Set" button located on the central dashboard, then, once in the settings menu, scroll with the up/down button until you find the "Reset Tyres" option, select it with the set button to turn off the tyre pressure light and exit the settings menu. Check the instrument cluster by turning it off and on again with the ignition key.

Updated on 14 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Reset Tyre Pressure Light on Fiat Panda
Reset Tyre Pressure Light on Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) When the tyre pressure light appears on your Fiat Panda, what should you do? Follow these steps. To reset the tyre pressure light, turn on the instru…
How to Reset the TPMS Light on a Fiat Panda
How to Reset the TPMS Light on a Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) The tyre pressure light, also known as the TPMS light, illuminates on the instrument cluster of the Fiat Panda when it is necessary to adjust the tyr…
How to Reset the Tyre Pressure Warning Light on the Fiat Panda 3
How to Reset the Tyre Pressure Warning Light on the Fiat Panda 3
Fiat Panda (2012-2021 / ) In today's video, you will learn how to reset the tyre pressure monitoring system (TPMS) warning light on the Fiat Panda third series by following th…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos