Do it yourself
Frequently asked questions about cars and motorcycles

Replacing Gear Knob on Fiat 500

Model: Fiat 500 312 - Years 2007-2021
Part: Shift knob

Removing the gear knob from the top of the lever to replace it? Start by removing the plastic cover on the knob with a screwdriver, then undo the gear knob using a socket or fixed spanner. Remove the leather gaiter from the edge of the centre tunnel and replace it with a new one (if damaged). Fit the new gear knob onto the lever and tighten the securing screw with the spanner. Refit the plastic cover on the gear knob. Conduct a final check to ensure all plastic parts are properly fitted.

Updated on 22 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat 500 (2007-2021 / 312) Before you begin, sit in the driver's seat of your Fiat 500. Start by prising off the top cover of the gear knob using a flat screwdriver. Next, unsc…
Fiat 500 (2007-2024 / 312) Do you want to replace the gear knob on your Fiat 500? Here’s how to proceed with the replacement. First, remove the plastic cover on the knob using …
Fiat 500 (2007-2021 / 312) In today's tutorial, you will learn how to remove and replace the gear knob in a Fiat 500. First, get inside the car and use a very thin plastic leve…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos