Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset Oil Maintenance Light on Fiat 500

Model: Fiat 500 312 - Years 2007-2021
Part: Service warning light

In this video, you will see the main steps to reset the routine maintenance light for the oil change. Get in the car and follow the indicated steps: turn the key to switch on the ignition and press the accelerator three times (pressing and releasing it for ten seconds each time). At this point, turn off the ignition. Turn it back on by turning the key, and you will see that the warning light has been reset. After the steps shown in the video, you will see how to do it in practice! Follow the steps correctly for a successful reset operation.

Updated on 22 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Service Light on the Fiat 500?
Fiat 500 (2007-2021 / 312) To reset the Oil Service light on the Fiat 500, first perform the oil change following the guidelines provided in the tutorial. Next, enter the cabin…
How to Reset the Service Light on the Fiat 500 X
Fiat 500 (2014-2022 / 500 X) In this brief and simple guide, you will see a quick and easy method to reset the service light for the routine maintenance oil change on the Fiat 50…
How to Reset the "Service" Light on a Fiat 500
How to Reset the "Service" Light on a Fiat 500
Fiat 500 (2012-2023 / 500 L) Before you can start the reset, ensure that the service has been carried out, then sit in the driver's seat of your Fiat 500. Begin by activating the…

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2014-2022 - What does the oil warning light indicate in the Fiat 500X? Read answer
    • 500 2014-2022 - How to reset the service warning light on the Fiat 500X? Read answer
    • 500 2007-2024 - How to reset the Abarth 595 Service warning light? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos