Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Service Light on the Fiat 500?

Model: Fiat 500 312 - Years 2007-2021
Part: Service warning light

To reset the Oil Service light on the Fiat 500, first perform the oil change following the guidelines provided in the tutorial. Next, enter the cabin and turn on the instrument panel. When the instrument panel is activated, a message will appear indicating that the oil needs to be replaced: to make it disappear, press the accelerator pedal three times. This will correctly reset the light; to verify the reset, you can turn off and then turn on the instrument panel again.

Updated on 26 April 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Reset the Oil Service Light on a Fiat 500L?
How to Reset the Oil Service Light on a Fiat 500L?
Fiat 500 (2012-2023 / 500 L) To reset the Oil Service light on a Fiat 500L, you must first change the oil. After the oil has been replaced, enter the cabin and turn on the igniti…
How to Reset the "Service" Light on a Fiat 500
How to Reset the "Service" Light on a Fiat 500
Fiat 500 (2007-2021 / 312) Before you can start, sit in the driver's seat of your Fiat 500. Begin by activating the instrument panel by turning the key in the ignition. Next, p…
How to reset the Service light on a Fiat 500 Abarth?
How to reset the Service light on a Fiat 500 Abarth?
Fiat 500 (2007-2024 / 312) To reset the Service light on a Fiat 500 Abarth, connect a diagnostic tool to the vehicle's OBD port, located on the dashboard just below the steerin…

    Frequently Asked Questions

    • 500 2014-2022 - What does the oil warning light indicate in the Fiat 500X? Read answer
    • 500 2014-2022 - How to reset the service warning light on the Fiat 500X? Read answer
    • 500 2007-2024 - How to reset the Abarth 595 Service warning light? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos