Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Service Light on a Fiat 500L?

Model: Fiat 500 500 L - Years 2012-2023
Part: Service warning light

To reset the Oil Service light on a Fiat 500L, you must first change the oil. After the oil has been replaced, enter the cabin and turn on the ignition, noting that the light will still be on. To turn it off, switch off the ignition and press the accelerator pedal three times in quick succession. Once this operation is completed, you can turn on the ignition again and check that the light has been successfully reset. By switching off and on the ignition in subsequent instances, the light will remain off.

Updated on 27 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the "Service" Light on a Fiat 500L?
How to Reset the "Service" Light on a Fiat 500L?
Fiat 500 (2012-2023 / 500 L) Before you can start, sit in the driver's seat of your Fiat 500L. First, activate the instrument panel without starting the engine. Once done, press …
How to Reset the Oil Service Light on the Fiat 500?
Fiat 500 (2007-2021 / 312) To reset the Oil Service light on the Fiat 500, first perform the oil change following the guidelines provided in the tutorial. Next, enter the cabin…
Tyre Pressure Monitoring System for Fiat 500L
Tyre Pressure Monitoring System for Fiat 500L
Fiat 500 (2012-2023 / 500 L) In this tutorial, we will briefly explain how the tyre pressure monitoring system works. When the warning light illuminates, it indicates an anomaly …

    Frequently Asked Questions

    • 500 2014-2022 - What does the oil warning light indicate in the Fiat 500X? Read answer
    • 500 2014-2022 - How to reset the service warning light on the Fiat 500X? Read answer
    • 500 2007-2024 - How to reset the Abarth 595 Service warning light? Read answer

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos