Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Brakes from a Fiat Punto

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Brake pads

See other generations:
Video tutorial

In this video tutorial, you will learn how to change the rear brake shoes of a Fiat Punto. First, loosen the wheel bolts and then lift the car with a hydraulic jack; remove the wheel.

Now, using a socket spanner, unscrew the drum screws and pull it off towards you. Next, remove the dust cap by prying at the sides and unscrew the hub nut with a socket spanner. Now you can extract the brake shoes by removing the retaining pin with pliers; finally, disconnect the wire from the spring and replace them with new ones.


Updated on 28 March 2026 by ScegliAuto


Related tutorials

How to Bleed and Replace the Brake Fluid on the Fiat Punto
How to Bleed and Replace the Brake Fluid on the Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) This guide will show you how to bleed and replace the brake fluid in the braking system of the Fiat Punto in simple steps. First, open the bonnet and…
How to Remove the Rear Seat Backs from a Fiat Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Before you start, lower the two rear seat backs of your Fiat Punto. Begin by removing the carpet in the boot. Next, remove the lower bench of the rea…
How to Replace the Rear Bushes of the Fiat Punto
How to Replace the Rear Bushes of the Fiat Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) This guide outlines the main steps to disassemble and replace the rear bushes of the Fiat Punto, following the instructions below. First, lift the ve…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos