Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Remote Battery in a Fiat Ulysse

Model: Fiat Ulysse MK 2 - Years 2002-2010
Part: Key

To replace the battery of the remote for generic Fiat cars (including the Fiat Ulysse), you need to access the battery housing. To perform this operation, rotate the metal key around its pivot to move it out of its seat. Inside the seat, you will find a screw that you need to unscrew with an appropriate screwdriver, and using the same screwdriver, pry at the edge of the battery block/housing (on the side near the screw) to extract it from its seat. At this point, replace the old battery with the new one and reassemble everything.

Updated on 31 March 2026 by ScegliAuto

Video tutorial

Related tutorials

What is the Fuse Diagram for a Fiat Ulysse?
What is the Fuse Diagram for a Fiat Ulysse?
Fiat Ulysse (2002-2010 / MK 2) The video accompanying this article shows the complete fuse diagram for a Fiat Ulysse. The fuse box is located inside the glove compartment, on the r…
How to Open the Bonnet on the Fiat Ulysse?
How to Open the Bonnet on the Fiat Ulysse?
Fiat Ulysse (2002-2010 / MK 2) In this short tutorial, you will see how to open the bonnet on the Fiat Ulysse, a very simple operation that follows the standard procedure, except f…
Where are the Fuses Located in the Fiat Ulysse?
Where are the Fuses Located in the Fiat Ulysse?
Fiat Ulysse (2002-2010 / MK 2) The fuses in the Fiat Ulysse are contained within designated fuse boxes installed in the vehicle. In this model, you can find three boxes. The first …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos