Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Indicator Bulb on a Fiat Punto Evo

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Headlight bulb

See other generations:
Video tutorial

In this video, you will learn how to remove and replace the front indicator bulb on a Fiat Punto Evo. First, fully turn the wheels to the affected side to access the wheel arch cover; then remove it by unscrewing the screws with a screwdriver and access the bulbs.

Disconnect the electrical connector by turning it and pull out the bulb holder along with the indicator bulb.

Now pull it out and replace it with a new one; reinsert the bulb by turning it in the opposite direction to secure it: then reattach the plastic cover!


Updated on 31 March 2026 by ScegliAuto


Related tutorials

Replacing Side Indicator Lens on Fiat Punto - Grande Punto
Replacing Side Indicator Lens on Fiat Punto - Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Today, you will learn how to remove and replace the lens of the side indicator bulb on a Fiat Punto and Grande Punto. First, remove the old lens by g…
How to Replace the Front Headlight Bulb of the Fiat Grande Punto Evo
How to Replace the Front Headlight Bulb of the Fiat Grande Punto Evo
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) This short video illustrates how extremely easy it is to replace the bulb, in this case, the position lights, of the Fiat Grande Punto Evo. First, op…
How to Replace the Front Headlamp Bulb of a Fiat Punto
How to Replace the Front Headlamp Bulb of a Fiat Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Before you start, open the bonnet of your Fiat Punto. Begin by unfastening and removing the rear cover of the blown bulb. Once done, release the clip…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos