Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fitting Rear Headlamp Bulb: Installing Second Reversing Light

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years 2005-2018
Part: Tail light bulb

To install a second reversing light in the left rear lamp, first obtain a bayonet lamp holder, the corresponding bulb, and some electrical cable to connect it to the right reversing light. Once the rear bumper and lights are removed, connect the cables from the lamp holder you want to install on the left to the right reversing light and thread them through the appropriate grommets to reach the left lamp. At this point, shape the seat of the lamp holder by drilling a circular hole in the back of the lamp and then file the three slots for the lamp holder's prongs.

Updated on 6 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Number Plate Light on a Fiat Grande Punto
How to Replace the Number Plate Light on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) How to replace the damaged bulb located above the number plate on a Fiat Grande Punto? Use a screwdriver or plastic lever to remove the number plate …
How to replace the rear light bulb on a Fiat Punto
How to replace the rear light bulb on a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) Before we can start, we will have to go to open the tailgate of the trunk of our Fiat Punto. So let's start by removing the top cover of the trunk, u…
How to change the indicator light bulb of the front headlight of the Fiat Punto
How to change the indicator light bulb of the front headlight of the Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) In these brief instructions, we will see how to disassemble and replace the turn signal bulb of the front headlight of the Fiat Punto. First, open th…

Other guides you may be interested in

Reset the Service Light on Fiat Bravo

Has the service light appeared on the instrument cluster of your Fiat Bravo? Let's reset it. Turn on the ignition, press the "Set" button located on the central dashboard, then, once in the settings menu, scroll using the up/down buttons until you find the "Reset Maintenance" option. Select it with the set button to turn off the tyre pressure warning light and exit the settings menu. Check the instrument cluster by turning it off and on again with the ignition key. Retry the reset if the issue persists.

Watch the video!


by ScegliAuto

More videos