Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Boot Panel from a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Door trim panel

See other generations:
Video tutorial

Today, we will see in this video tutorial how to remove the boot panel on a second-generation Fiat Panda by following these simple steps. First, open the boot lid and unscrew the fixing screws located on the cord using a Torx screwdriver; then, remove the clips securing the panel, as shown in the video.

At this point, pry at the sides to remove the boot panel covering. Next, instructions will be provided on how to remove the electric lock handle; follow the tutorial to the end if interested!


Updated on 2 April 2026 by ScegliAuto


Related tutorials

How to Remove the Door Panel of a Fiat Panda
How to Remove the Door Panel of a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before starting, open the door of your Fiat Panda. Begin by unfastening and removing the covers near the internal door handle. Next, unscrew and remo…
How to Replace the Boot Light on a Fiat Panda
How to Replace the Boot Light on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Here’s how to replace the boot light on a Fiat Panda: First, you can find these specific bulbs on Amazon for £9.99 for a pack of 4 T10 W5W bulbs, wit…
How to Remove the Door Panel of a Fiat Panda
How to Remove the Door Panel of a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Start by opening the door of your Fiat Panda. Next, unclip and remove the covers located near the internal door handle. Once done, unscrew and remove…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos