Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Hood of a Fiat 500

Model: Fiat 500 Epoca - Years 1957-1975
Part: Convertible top

Before you can start, you need to open the hood of your Fiat 500. Begin by removing the nut covers using a small flathead screwdriver and prying them off. This will expose the nuts that secure the hood. Proceed to unscrew and remove these nuts using a 17mm spanner. Once you have removed the two central nuts, you can slide the hood back enough to reach the two rear screws, which also need to be removed. At this point, unscrew the rear bolts from inside the cabin. Once you have completed this step, you can remove the hood, and you will have finished the disassembly.

Updated on 3 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Hood on a Fiat 500
How to Remove the Hood on a Fiat 500
Fiat 500 (1957-1975 / Epoca) How do you remove the hood of an old-style Fiat 500? Follow this guide: using a screwdriver, remove the nut covers located at the sides of the hood, …
How to Remove the Hood of the Fiat 500 Cabrio?
How to Remove the Hood of the Fiat 500 Cabrio?
Fiat 500 (2007-2021 / ) To remove the hood of the Fiat 500, press the designated button located inside the cabin to fully lower the hood. Once it is lowered, detach the fast…
How to Remove the Roof of a Classic Fiat 500
How to Remove the Roof of a Classic Fiat 500
Fiat 500 (1957-1975 / Epoca) How to remove the roof of a classic Fiat 500? Follow these steps: use a screwdriver to remove the nut covers located at the sides of the roof (next t…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos