Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Uno
    4. : Removing the starter motor on Fiat Uno Fire

Fiat Uno - Video tutorial

Model: Fiat Uno MK 1 - Years 1983-1995
Part: Starter motor
Operation: Removing the starter motor on Fiat Uno Fire

In this video tutorial we will see how to disassemble and replace the starter motor on a Fiat Uno with Fire engine, following these simple steps. First we open the bonnet of our car and we go to disconnect the battery terminals in advance; then we go to identify the starter motor, which we find at the bottom, and use a socket wrench to unscrew the fixing screws, as shown in the video. At this point we disconnect the various fastons and unscrew the nut to be able to remove the motor; follow the video to the end for replacement!


Posted on 22 January 2024 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos