Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Headlamp of a Fiat Punto

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Headlight

See other generations:
Video tutorial

In today's tutorial video, you will learn how to remove the front headlamp of a second series Fiat Punto with ease. First, open and lift the bonnet: using a 10 mm socket spanner, undo the bolts of the headlamp support bracket and the screw located at the bottom of the headlamp, as shown in the video.

At this point, remove the front lamp and disconnect the electrical connector of the bulbs by pressing the tab with a sharp object. To refit, simply apply the reverse procedure of disassembly.


Updated on 10 April 2026 by ScegliAuto


Related tutorials

How to Remove the Front Headlamp of the Fiat Punto?
How to Remove the Front Headlamp of the Fiat Punto?
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Removing the front headlamp of the Fiat Punto is very simple. Follow this tutorial applicable to the second and third series Punto. For this operatio…
How to Replace the Front Headlamp of a Fiat Punto
How to Replace the Front Headlamp of a Fiat Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) This operation takes just a few minutes. Simply release the bonnet to lift it and secure it with the prop rod. Pay attention to ensure the connector …
How to Replace the Front Headlamp of the Fiat Punto?
How to Replace the Front Headlamp of the Fiat Punto?
Fiat Punto (1999-2011 / MK 2, 188) To replace the front headlamp of the Fiat Punto, loosen the screws located inside the corresponding wheel arch. You will also need to loosen a screw …

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos