Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Front Headlamp of the Fiat Punto?

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Checks and maintenance

To replace the front headlamp of the Fiat Punto, loosen the screws located inside the corresponding wheel arch. You will also need to loosen a screw found on the inner part of the bumper, accessible from the lower part of the car. Removing these screws will allow you to detach the bumper, providing space for the headlamp to be extracted. At this point, you can pull the headlamp out of its housing and disconnect the relevant connector. Once the old headlamp is removed, you can install the new replacement part.

Updated on 24 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In order to replace the headlight bulb of the Fiat Punto, you need to open the hood so that you can access the components inside the engine compartme…
Fiat Punto (1999-2011 / MK 2, 188) To replace the front headlamp bulb on a Fiat Punto, open the bonnet to access the components inside the engine bay. Locate the protective cover of th…
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Does the front headlight of your Fiat Grande Punto have blown bulbs? Let's replace them with new bulbs. Open the bonnet by pulling the release lever …

    Frequently Asked Questions

    • Punto 2005-2018 - What problem does the Fiat Punto have with the "city mode"? Read answer
    • Punto 2005-2018 - How to bleed the Fiat Punto clutch pedal? Read answer
    • Punto 2005-2018 - What does the words "ESP, Hill holder not available" mean on the Fiat Punto Evo? Read answer
    • Punto 1999-2011 - How do you remove the headrest of the Fiat Punto 1.2? Read answer
    • Punto 2005-2018 - Where is the inertia switch on the Fiat Punto? Read answer
    • Punto 2005-2018 - How do i remove the center console of my Fiat Punto? Read answer
    • Punto 1999-2011 - How does the air conditioning of the Fiat Punto work? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos