Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on a Fiat Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Light bulb

See other generations:
Video tutorial

To replace the front headlamp bulb on a Fiat Punto, access the rear of the headlamp by opening the bonnet and entering the engine compartment. Here, you will find the protective cover that needs to be removed, allowing you to disconnect the connector and extract the bulb from its housing.

Once the old bulb is removed, connect the new one to the appropriate connector, inserting it into the housing at the rear of the headlamp. After the bulb is inserted, close it with the cover.


Updated on 5 June 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulb of a Fiat Punto
How to Replace the Front Headlamp Bulb of a Fiat Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Before you start, open the bonnet of your Fiat Punto. Begin by unfastening and removing the rear cover of the blown bulb. Once done, release the clip…
How to Replace the Front Headlamp Bulb on a Fiat Punto?
How to Replace the Front Headlamp Bulb on a Fiat Punto?
Fiat Punto (1999-2011 / MK 2, 188) To replace the front headlamp bulb on a Fiat Punto, open the bonnet to access the components inside the engine bay. Locate the protective cover of th…
How to Replace the Front Headlight Bulb on a Fiat Punto?
How to Replace the Front Headlight Bulb on a Fiat Punto?
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To replace the front headlight bulb on a Fiat Punto, open the bonnet to access the engine bay. You will need to remove the protective cover from the …

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos