Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight Bulb on a Fiat Punto?

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Light bulb

See other generations:
Video tutorial

To replace the front headlight bulb on a Fiat Punto, open the bonnet to access the engine bay. You will need to remove the protective cover from the back of the affected headlight. By removing the cover, you can take out the bulb from its housing and disconnect it from its connector.

Once the bulb is removed, connect the new one to the connector and insert it back into its housing. After replacement, close the back of the headlight with the protective cover and check its correct operation.


Updated on 25 April 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulb on a Fiat Punto
How to Replace the Front Headlamp Bulb on a Fiat Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To replace the front headlamp bulb on a Fiat Punto, access the rear of the headlamp by opening the bonnet and entering the engine compartment. Here, …
How to Replace the Front Headlamp Bulb on a Fiat Punto?
How to Replace the Front Headlamp Bulb on a Fiat Punto?
Fiat Punto (1999-2011 / MK 2, 188) To replace the front headlamp bulb on a Fiat Punto, open the bonnet to access the components inside the engine bay. Locate the protective cover of th…
How to Replace the Front Headlamp Bulb of a Fiat Punto
How to Replace the Front Headlamp Bulb of a Fiat Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Before you start, open the bonnet of your Fiat Punto. Begin by unfastening and removing the rear cover of the blown bulb. Once done, release the clip…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos