Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Front Headlight Bulb on a Fiat Punto

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Headlight bulb

See other generations:
Video tutorial

Before starting, open the bonnet of your Fiat Punto. Begin by prising off and removing the bulb cover.

Next, unclip the blown bulb and disconnect the corresponding electrical connector. This will free the blown bulb.

Proceed to extract it from its housing, and you will have completed the disassembly. To fit the new bulb, simply follow this straightforward procedure in reverse, and you will have successfully completed the replacement.


Updated on 10 April 2026 by ScegliAuto


Related tutorials

Fiat Punto (2005-2018 / Grandepunto , Punto EVO, MK 3, 199) Before you start, open the bonnet of your Fiat Punto. Begin by unfastening and removing the rear cover of the blown bulb. Once done, release the clip…
Fiat Punto (2005-2018 / Grandepunto , Punto EVO, MK 3, 199) To replace the front headlight bulb on a Fiat Punto, open the bonnet to access the components inside the engine compartment: here, locate the interna…
Fiat Punto (2005-2018 / Grandepunto , Punto EVO, MK 3, 199) To replace the front headlamp bulb on a Fiat Punto, access the rear of the headlamp by opening the bonnet and entering the engine compartment. Here, …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos