Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Fuses in the Fiat Punto

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Fuse box

How to replace the fuses in the Fiat Punto? Let's see how to replace the damaged fuses inside the vehicle. Unscrew the screws of the cover, then remove it from the dashboard. Use needle-nose pliers to disconnect the damaged fuses in the compartment. Once this is done, insert the new fuses into their designated slots in the compartment. Finally, close the fuse inspection box with the cover. Test the correct functioning of the car by turning on the ignition and checking all electrical mechanisms.

Updated on 11 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace a Fuse on a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) Let's see how to replace damaged fuses inside the engine compartment of a Fiat Punto. Open and lift the front bonnet to access the fuse box (secure t…
Replacing Fuses in a Fiat Grande Punto
Replacing Fuses in a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Do you want to replace the fuses in a Fiat Grande Punto? Here’s how to remove the covers of the fuse box. Lift the front bonnet to access the fuses. …
Where is and how to reach the auxiliary fuse box of a Fiat Punto?
Where is and how to reach the auxiliary fuse box of a Fiat Punto?
Fiat Punto (1999-2011 / MK 2, 188) The auxiliary fuse box of a Fiat Punto is located under the cover, on the left side relative to the steering column. To reach it, you must first open…

    Frequently Asked Questions

    • Punto 1999-2011 - Where is the fuse of the reversing light of the Fiat Punto located? Read answer
    • Punto 1999-2011 - Where can I find the cigarette lighter fuse in FIAT Punto 188? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos