Do it yourself
Frequently asked questions about cars and motorcycles

Replacing Fuses in a Fiat Grande Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Fuse box

See other generations:
Video tutorial

Do you want to replace the fuses in a Fiat Grande Punto? Here’s how to remove the covers of the fuse box. Lift the front bonnet to access the fuses. Remove the cover in the engine compartment using a plastic lever, then use pliers to pull out the damaged fuses located in the compartment.

Once this is done, insert the new fuses into their designated slots in the compartment. Close the fuse inspection box with the cover.

Close the front bonnet. Test the correct operation of the vehicle after replacing the damaged fuses.


Updated on 2 May 2026 by ScegliAuto


Related tutorials

Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Fuse replacement on the Fiat Grande Punto? Let's see where they are located. Open the door and enter the cabin, then open the glove compartment in th…
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this short and simple guide, you will find where to locate the two fuse boxes (internal and external) and how to obtain their diagram for the Fiat…
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) If you need to replace a damaged fuse in your Fiat Grande Punto, refer to this video to locate the fuse box and, if necessary, replace them using the…

    Frequently Asked Questions

    • Punto 1999-2011 - Where is the fuse of the reversing light of the Fiat Punto located? Read answer
    • Punto 2005-2018 - Where is the fuel pump relay located in the Fiat Grande Punto? Read answer
    • Punto 2005-2018 - Where is the air conditioning fuse on Fiat Grande Punto? Read answer
    • Punto 2005-2018 - Where is the Fiat Grande Punto turn signal relay located? Read answer

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos