Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Washer Fluid Reservoir from a Fiat 500

Model: Fiat Cinquecento MK 1 - Years 1991-1998

In this tutorial video, we will see the instructions and main steps on how to remove the washer fluid reservoir from a second-generation Fiat 500, from 1991 to 1998. First, turn the front wheels fully to the right (turn the steering wheel clockwise) and remove the screws from the wing to access the washer reservoir. At this point, remove the pipe that carries the fluid to the nozzles and take off the support bracket for the reservoir; then all that remains is to detach and remove it to replace it with a new one.

Updated on 13 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the External Wing Mirror of the Fiat Cinquecento
Removing the External Wing Mirror of the Fiat Cinquecento
Fiat Cinquecento (1991-1998 / MK 1) In this guide, we will see the steps to remove and replace the external wing mirror of the Fiat Cinquecento, following the instructions below. First,…
How to Remove the Instrument Cluster in a Fiat Cinquecento
How to Remove the Instrument Cluster in a Fiat Cinquecento
Fiat Cinquecento (1991-1998 / MK 1) How to remove the instrument cluster in a Fiat Cinquecento? Follow these steps for proper removal. Remove the plastic cover (trim) of the instrument …
How to Remove the Centre Tunnel of a Fiat Cinquecento
How to Remove the Centre Tunnel of a Fiat Cinquecento
Fiat Cinquecento (1991-1998 / MK 1) How to remove the centre tunnel of a Fiat Cinquecento? Start by removing the securing pins of the trim located at the bottom of the gear knob using a…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos