Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Radiator on the Fiat Cinquecento Sporting

Model: Fiat Cinquecento MK 1 - Years: 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998
Part: Radiator

Video tutorial

Discover the procedure to remove and replace the cooling radiator on the Fiat Cinquecento Sporting in simple and quick steps. First, open the bonnet of your car and start by removing the front bumper; to do this, undo the fastening screws found on the sides and wheel arches, also removing those above the bumper, as shown in the video.

At this point, unscrew the radiator bracket screws using a socket spanner to remove it; finally, disconnect the coolant hoses to replace it!


Updated on 20 May 2026 by ScegliAuto


Related tutorials

How to replace the external door handle of the Fiat Cinquecento
How to replace the external door handle of the Fiat Cinquecento
Fiat Cinquecento (1991-1998 / MK 1) Today we will see the instructions that will allow us to disassemble and replace the external handle of the front door of the Fiat Cinquecento. First…
Instructions for Installing a Manual Fan Switch on a Fiat Cinquecento
Instructions for Installing a Manual Fan Switch on a Fiat Cinquecento
Fiat Cinquecento (1991-1998 / MK 1) In this video, you will see instructions on how to install a switch for manually activating the fan on a Fiat Cinquecento, to address potential engin…
Removing the External Wing Mirror of the Fiat Cinquecento
Removing the External Wing Mirror of the Fiat Cinquecento
Fiat Cinquecento (1991-1998 / MK 1) In this guide, we will see the steps to remove and replace the external wing mirror of the Fiat Cinquecento, following the instructions below. First,…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos