|
Do it yourself
| |||
| ||||
How to Dismantle the Methane Injectors on Fiat Multipla
Model: Fiat Multipla
MK 1
- Years:
1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Video tutorial
Using a 19 mm spanner, unscrew the bolt between the rail and the injector. As shown in the video, simply press the two clips that act as hooks to release the injector itself. Do this for all the injectors, and they will be free from the electrical side. Then, using a socket wrench, remove the other two bolts that act as stops. Now the "rail" is dismantled; also remove the snap-in clip (a ring) by pulling it off with some force, and the injectors will detach. At this point, you can simply clean them or also dismantle them, proceeding in reverse, placing them back with the ring and screwing in the previously removed bolts.
Updated on 13 April 2026 by ScegliAuto
Related tutorials
Fiat Multipla
(1998-2010 /
MK 1)
In this video, learn how to dismantle and clean the methane injectors on a Fiat Multipla. Open the engine bay, lift the bonnet, secure it, and discon…
Fiat Multipla
(1998-2010 /
MK 1)
Before starting, open the bonnet of your Fiat Multipla by pulling the designated release handle located at the bottom left of the steering column. Be…
Fiat Multipla
(1998-2010 /
MK 1)
If you own a Fiat Multipla and want to locate the OBD port, carefully follow this guide and apply the described steps. First, enter your Fiat Multipl…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in |
Where is the battery located on the Aprilia Scarabeo 250ie scooter?
This video shows where the battery is located on the Aprilia Scarabeo 250ie scooter and how to proceed if you need to replace it. As shown, it is located beneath the seat. To access and replace it, first open the seat, then remove the plastic cover by unscrewing the relevant screws with a cross-head screwdriver. Next, disconnect both terminals, starting with the negative, remove the battery from its housing, and install the new replacement following the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.015
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |