Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Door Panel on Fiat Grande Punto

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Door trim panel

In this video tutorial, you will see how to remove the front door panel and how to dismantle the window regulator mechanism on a Fiat Grande Punto, following the instructions below. First, open the front door and start by removing the plastic caps found on the panel to access the screws underneath; use a Torx screwdriver for this, as shown in the video. Next, unscrew the side screws on the panel, then remove it; the dismantling of the window regulator mechanism is illustrated afterwards!

Updated on 14 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Panel on a Fiat Grande Punto
How to Remove the Door Panel on a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) This guide outlines the steps to remove and replace the front door panel of a Fiat Grande Punto, as well as the Punto Evo. First, open the front door…
How to Remove the Front Left Door Panel on a Fiat Grande Punto
How to Remove the Front Left Door Panel on a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) How to remove the front left door panel on a Fiat Grande Punto? Here's how to proceed: before starting the disassembly work, disconnect the battery t…
Removing the Rear Door Panel from a Fiat Grande Punto
Removing the Rear Door Panel from a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this video tutorial, you will learn how to remove the rear door panel from a Fiat Grande Punto. First, open the door and then remove the window ha…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos