Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing Central Console

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Dashboard

Removing the controls on the central console is a fairly simple operation that does not require special tools or skills. Start by detaching the gear lever gaiter by pulling it along the edges; then unscrew the two screws under the gaiter, those on the sides, and those under the ashtray. At this point, detach the central console covering by pulling it forward: first, remove the covering of the central tunnel by detaching the switch panel under the handbrake (remove the other screws at the rear). Now remove the switch panel with the window controls.

Updated on 7 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Handbrake Adjustment Instructions
Handbrake Adjustment Instructions
Fiat Punto (1993-1999 / 176, MK 1) The adjustment nut for the handbrake cable is located just under the lever: to adjust it, you need to remove the end section of the centre tunnel tha…
Replacing the Cabin Air Filter
Replacing the Cabin Air Filter
Fiat Punto (2005-2018 / Grandepunto , MK 3, Punto EVO, 199) The cabin air filter is located behind the centre tunnel, but to extract the filter, you also need to remove the glove compartment and the air duct. …
Front fender replacement instructions on Fiat Grande Punto
Front fender replacement instructions on Fiat Grande Punto
Fiat Punto (1999-2011 / MK 2, 188) We see in this video the main instructions on how to remove and replace the front fender on a Fiat Grande Punto, following the instructions below. Fi…

    Frequently Asked Questions

    • Punto 2005-2018 - Which bulbs do I need for the position lights of my Fiat Punto with 1.3 MultiJet engine? Read answer

How to Remove the Grille on a Ford Ranger

In this video, learn how to remove the grille located on the front bumper of a Ford Ranger. Prepare to take off the plastic grille: use a socket spanner to unscrew the fasteners securing the grille (located on the inside of the bumper). With a plastic lever, pry between the grille and the bumper until it disengages from its housing. Once the grille is free, remove it from the bumper and fit a new one. Refit the grille onto the car's bumper by pressing it into place and screw the fasteners back in. Check that all parts are correctly mounted.

Watch the video!


by ScegliAuto

More videos