Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Air Filter

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Cabin air filter

See other generations:
Video tutorial

The cabin air filter is located behind the centre tunnel, but to extract the filter, you also need to remove the glove compartment and the air duct. Start by removing the front covering of the centre tunnel, then move on to the glove compartment door: you need to unclip the rear latch to remove it completely.

Finally, unclip the air duct that passes right in front of the filter housing to extract the latter. Once you are sure there are no dirt residues, insert the new filter respecting the direction of the airflow and reassemble everything.


Updated on 17 February 2026 by ScegliAuto


Related tutorials

Replacing the Cabin Air Filter on a Punto
Replacing the Cabin Air Filter on a Punto
Fiat Punto (1999-2011 / MK 2, 188) Is the cabin air filter on a Punto due for a change? Not sure how to do it? Here’s how to remove it. Open the front right door. Remove the securing p…
Replacing the Cabin Air Filter on Fiat Punto 188
Replacing the Cabin Air Filter on Fiat Punto 188
Fiat Punto (1999-2011 / MK 2, 188) In this video tutorial, learn how to remove and replace the cabin air filter on a Fiat Punto 188. The removal process is very simple and does not req…
How to replace the cabin air filter of the Fiat Punto
How to replace the cabin air filter of the Fiat Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) The cabin air filter of the Fiat Punto series 3 is located inside the cabin under the passenger side glove compartment. To replace the filter, it is …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos