Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Radiator from Fiat Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Heater core

See other generations:
Video tutorial

Remove the front bumper and disconnect the connectors of the lamps. By removing the clips, detach the intercooler hoses and extract it. To remove the radiator, simply unscrew the three 8mm screws that hold it in place, although it is advisable to also remove the bolt for the air conditioning pipes.

Now you can also detach the two radiator hoses, one large and one smaller. Position the new radiator, screw it in, attach the two hoses remembering the clips, then install the condenser and replace the bumper, but not before reconnecting the connectors for the lamp lights.


Updated on 14 April 2026 by ScegliAuto


Related tutorials

Removing the Cabin Heater Radiator of the Fiat Punto
Removing the Cabin Heater Radiator of the Fiat Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) This guide will cover the main steps to remove and replace the cabin heater radiator of the Fiat Grande Punto, as well as the Punto Evo. Before remov…
Replacing the Heating Radiator on a Fiat Grande Punto
Replacing the Heating Radiator on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Is the heating radiator on your Fiat damaged? Let's look at removing the radiator located inside the Fiat cabin. Open the door and locate the heating…
How to Replace the Radiator on a Fiat Punto?
How to Replace the Radiator on a Fiat Punto?
Fiat Punto (1999-2011 / MK 2, 188) To replace the radiator on a Fiat Punto, open the bonnet to access the engine compartment; then disconnect the pipes connected to the radiator to col…

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos