Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Radiator on a Fiat Punto?

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Radiator

See other generations:
Video tutorial

To replace the radiator on a Fiat Punto, open the bonnet to access the engine compartment; then disconnect the pipes connected to the radiator to collect the coolant in a container. Next, loosen all the fixing screws of the radiator and disconnect all connectors attached to it. Once the part is completely free, you can remove it from the top of the engine compartment and replace it with a new spare part.

The new radiator must be properly connected to the connectors and pipes.


Updated on 30 May 2026 by ScegliAuto


Related tutorials

How to Replace the Cooling Radiator on a Fiat Grande Punto
How to Replace the Cooling Radiator on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Today's guide will show you how to remove and replace the engine cooling radiator on a Fiat Grande Punto. First, open the bonnet and start by removin…
How to Replace the Air Filter in a Fiat Grande Punto?
How to Replace the Air Filter in a Fiat Grande Punto?
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this tutorial, see how to replace the air filter in a Fiat Grande Punto, an extremely simple and quick operation. First, ensure that the engine is…
How to Set the Time on a Fiat Grande Punto
How to Set the Time on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Before you start, sit in the driver's seat of your Fiat Grande Punto. Begin by activating the instrumentation by turning the key in the ignition swit…

    Frequently Asked Questions

    • Punto 2005-2018 - Where is the Fiat Grande Punto radiator fluid reservoir located? Read answer
    • Punto 2005-2018 - Where are the Fiat Grande Punto radiator drain plugs located? Read answer

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos