Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Heating Radiator on a Fiat Grande Punto

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Heater core

Is the heating radiator on your Fiat damaged? Let's look at removing the radiator located inside the Fiat cabin. Open the door and locate the heating radiator cover under the dashboard (left side of the centre console near the pedals). Unscrew the securing screws above the plastic cover: remove the plastic cover and locate the radiator that you will disassemble. Unscrew the radiator securing screws, disconnect the coolant pipes after removing the clips. Remove the radiator from its housing (pull it out by hand). Fit the new radiator, reconnect the pipes, and cover it with the plastic cover.

Updated on 1 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Cabin Heater Radiator of the Fiat Punto
Removing the Cabin Heater Radiator of the Fiat Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) This guide will cover the main steps to remove and replace the cabin heater radiator of the Fiat Grande Punto, as well as the Punto Evo. Before remov…
How do you replace the heating radiator of the Fiat Grande Punto?
How do you replace the heating radiator of the Fiat Grande Punto?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To replace the heating radiator of the Fiat Grande Punto, you will need to loosen the screws that secure the side cover panel of the driver's footwel…
Replacement of the heater radiator of the Fiat Punto cabin
Replacement of the heater radiator of the Fiat Punto cabin
Fiat Punto (1999-2011 / MK 2, 188) Today we will see the instructions that will allow us to disassemble and replace the heater radiator of the Fiat Punto. In order to access the heater…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos