Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Headlamp Bulb

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Tail light bulb

To replace the bulbs of the rear light, you need to remove it: this operation is very simple, just open the rear boot and unscrew the fixing screws of the light itself; once removed, you can separate the bulb holder fixed with small self-tapping screws. Once the bulb holder is on the bench, it is recommended to clean the power socket (also that of the original wiring) and the bulb seats (bayonet fitting) with contact cleaner spray to remove any oxidation residues. After cleaning, insert the new bulbs and proceed to reassemble in reverse order.

Updated on 7 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Fitting Rear Headlamp Bulb: Installing Second Reversing Light
Fitting Rear Headlamp Bulb: Installing Second Reversing Light
Fiat Punto (2005-2018 / 199, MK 3, Punto EVO, Grandepunto ) To install a second reversing light in the left rear lamp, first obtain a bayonet lamp holder, the corresponding bulb, and some electrical cable to c…
Replacement of the Rear Headlamp Bulb
Replacement of the Rear Headlamp Bulb
Fiat Punto (1999-2011 / MK 2, 188) .. In this video, observe the procedure for replacing the rear headlamp bulb on a Fiat Punto. The illumination of the yellow bulb-shaped warning.. …
How do you replace the third brake light bulb on the Fiat Punto?
How do you replace the third brake light bulb on the Fiat Punto?
Fiat Punto (1999-2011 / MK 2, 188) The replacement of the third brake light bulb on the Fiat Punto is done by opening the rear hatch so that access can be gained to the panel located o…

How to Replace the Rear Door Lock on an Audi A4

First, disconnect the negative cable from the battery. Now, open the door in question and lift the chrome strip at the top. Then, remove all the screws indicated in the video. You can now lift the door panel by pulling it towards you. Disconnect the connectors at the back and remove the panel. Next, you will need to remove the components shown in the video. Also, detach the weatherstrip around the door and the protective sheet. You will also need to remove the window glass by disconnecting all the connectors and bolts. Then, replace the damaged part and retrace the steps described in reverse.

Watch the video!


by ScegliAuto

More videos