Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Radiator Coolant in a Peugeot 206

Model: Peugeot 206 MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Checks and maintenance

Video tutorial

Let's see how to replace the radiator coolant in a Peugeot 206. Disconnect the radiator hose at the bottom using a socket spanner, allowing the rusty and debris-filled coolant to drain into a container. Flush the cooling system with a suitable hose (as shown in the video), performing this procedure until the pipes and radiator are completely clean.

Reconnect the previously removed hoses, tighten the securing bolts of the radiator's metal clips in the engine compartment. Prepare to top up with new coolant.

Finally, check for any leaks in the system.


Updated on 9 March 2026 by ScegliAuto


Related tutorials

How to Replace the Coolant in a Peugeot 206?
How to Replace the Coolant in a Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) In this tutorial, you will learn how to replace the coolant in a Peugeot 206. Before proceeding, wait for the engine to cool completely; otherwise, y…
Guide to Replacing the Cooling Radiator on a Peugeot 206 1.4
Guide to Replacing the Cooling Radiator on a Peugeot 206 1.4
Peugeot 206 (1998-2012 / MK 1) The main instructions in this guide will show you how to disassemble and replace the cooling radiator of the Peugeot 206 1.4 engine. First, open the …
How to maintain the cooling system of the Peugeot 206
How to maintain the cooling system of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) In this video we see how to perform maintenance on the cooling system of the Peugeot 206: we open the hood and the cap of the coolant expansion tank,…

    Frequently Asked Questions

    • 206 1998-2012 - Where is the inertia switch on the Peugeot 206? Read answer
    • 206 1998-2012 - Where is the Peugeot 206 petrol pump relay located? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos