Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 206
    4. : How to replace the radiator of the Peugeot 206

Peugeot 206 - Video tutorial

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Radiator
Operation: How to replace the radiator of the Peugeot 206

Today we will discover the instructions that will allow us to disassemble and replace the radiator of the Peugeot 206, following the instructions below. First, we open the hood of the car and start unscrewing the fixing screws we find on the top of the radiator; then we disconnect the coolant pipe, letting it drain into a container, as shown in the video. At this point, we disconnect the electrical connector of the fan, removing it along with the radiator; if necessary, we replace the radiator with the new one, applying the reverse process of disassembly!


Posted on 3 May 2024 by ScegliAuto

    Frequently Asked Questions

    • 206 1998-2012 - What does it cost to replace the Peugeot 206 radiator? Read Answer
    • 206 1998-2012 - How much does it cost to replace the Peugeot 206 radiator? Read Answer
    • 206 1998-2012 - What to do if the radiator fan does not work on Peugeot 206? Read Answer
    • 206 1998-2012 - How much does the Peugeot 206 radiator cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos