Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 206
    4. : How do you replace the radiator of the Peugeot 206?

Peugeot 206 - Video tutorial

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Radiator
Operation: How do you replace the radiator of the Peugeot 206?

In order to replace the radiator of the Peugeot 206, you need to access the lower part of the engine compartment by disconnecting the corresponding tube to collect the coolant in a suitable container. After disconnecting the tubes, it will be possible to proceed by unscrewing the fastening screws of the supports and disconnecting all the appropriate connectors: the screws will be located both in the upper and lower part of the engine compartment. This way, the old radiator can be removed from its housing and replaced with a new replacement piece.


Posted on 14 September 2023 by ScegliAuto

    Frequently Asked Questions

    • 206 1998-2012 - What does it cost to replace the Peugeot 206 radiator? Read Answer
    • 206 1998-2012 - How much does it cost to replace the Peugeot 206 radiator? Read Answer
    • 206 1998-2012 - What to do if the radiator fan does not work on Peugeot 206? Read Answer
    • 206 1998-2012 - How much does the Peugeot 206 radiator cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos