Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the Peugeot 206 cabin heater radiator.

Model: Peugeot 206 MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Heater core

Video tutorial

In this guide we will see the instructions that will allow us to disassemble and replace the heating radiator of the Peugeot 206's cabin. First, we get on board the car and start by removing the plastic cover found at the bottom, on the driver's side; then we disconnect the coolant pipe, unscrewing the radiator brackets to remove it, as shown in the video.

At this point, we replace the heating radiator with the original one, installing it correctly and reassembling the pipe, then topping up with the new fluid.


Posted on 7 December 2024 by ScegliAuto


Related tutorials

Guide to replacing the cabin heating radiator of the Peugeot 206
Guide to replacing the cabin heating radiator of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Today's guide will show us the information that will allow us to disassemble and replace the heater radiator of the Peugeot 206. First, we open the f…
How to Remove the Cabin Heater Radiator of the Peugeot 206
How to Remove the Cabin Heater Radiator of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Let's briefly look at the instructions that will allow you to remove and replace the cabin heater radiator of the Peugeot 206. First, get inside the …
Guide to Removing the Heater Radiator from a Peugeot 206
Guide to Removing the Heater Radiator from a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) In this guide, you will see the steps that will allow you to remove and replace the heater radiator of the Peugeot 206. First, open the bonnet of you…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos